Crown Automotive 43219 Dana 35 Standard Differential Case for 87-95 Jeep Wrangler YJ & 87-96 Cherokee XJ
1990-1990 YJ Wrangler
1991-1995 YJ Wrangler Without ABS
1987-1993 XJ Cherokee
1994-1996 XJ Cherokee w/ Casting #: 42148
- Axle Model: Dana 35
- Axle Position: Rear
- Features: Open-Differential
- Shipping Weight: 11lb
- Shipping Dimensions: 7in x 7in x 7in (L x W x H)
Jeep Cherokee (XJ)
- 1996 Jeep Cherokee (XJ)
- 1995 Jeep Cherokee (XJ)
- 1994 Jeep Cherokee (XJ)
- 1993 Jeep Cherokee (XJ)
- 1992 Jeep Cherokee (XJ)
- 1991 Jeep Cherokee (XJ)
- 1990 Jeep Cherokee (XJ)
- 1989 Jeep Cherokee (XJ)
- 1988 Jeep Cherokee (XJ)
- 1987 Jeep Cherokee (XJ)
Jeep Wrangler (YJ)
- 1995 Jeep Wrangler (YJ)
- 1994 Jeep Wrangler (YJ)
- 1993 Jeep Wrangler (YJ)
- 1992 Jeep Wrangler (YJ)
- 1991 Jeep Wrangler (YJ)
- 1990 Jeep Wrangler (YJ)
- 1989 Jeep Wrangler (YJ)
- 1988 Jeep Wrangler (YJ)
- 1987 Jeep Wrangler (YJ)
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
Crown Automotive Dana 35 Standard Differential Case Reviews
Fitted this carrier to my stock 1989 Wrangler YJ (Rear differential - Dana 35)
My old Dana 35 gear carrier was at the end of life due to past damage. (previous owner).
Note that if your original carrier is from 1987-1989 it will likely have a spring dowel locking pin (which you need to drift out) that locks the spider gear shaft in place. This carrier requires the screw in pin to lock the spider gear shaft in place. This is a bare carrier (no pins) so you'll need to order the locking pin separately.
If you happen to order the correct replacement spider gear set, the set comes with both types of shaft locking pins.
All other aspect of the carrier, OEM ring gear fitment etc. are a perfect fit for an 89 YJ Dana 35 diff.