Brok 32956 2" Shank Ball Mount with Pin Stop 3" Drop

The bROK 2” Shank Ball Mount incorporates "pin stop" technology to enable one wrench to tighten bROK and hex shaped hitch balls. A 2-in drop from the top of your receiver aids in leveling your trailer while towing. Constructed with welded steel and a black powder coat finish for years of service. The 2-in shank accommodates all class III-IV receivers, a 5/8-in hole for receiver pin or lock and a 1-in hole for the hitch ball Shank.

2" Drop Specifications:

• Length - 12.5"
• Height - 2.5"
• Width - 3"
• Class - III / IV
• Receiver Opening - 2"
• Capacity GTW - 6000lbs.
• Capacity TW - 600lbs.
• Drop - 2"
• Rise - 0.75"
• Ball Hole Diameter - 1"
• Pin Hole Diameter - 0.62"
• One Wrench to Tighten - Yes

3" Drop Specifications:

• Length - 13.5"
• Height - 2.5"
• Width - 4.25"
• Class - III / IV
• Receiver Opening - 2"
• Capacity GTW - 5000lbs.
• Capacity TW - 500lbs.
• Drop - 3"
• Rise - 1.75"
• Ball Hole Diameter - 1"
• Pin Hole Diameter - 0.62"
• One Wrench to Tighten - Yes

5" Drop Specifications:

• Length - 15"
• Height - 2.5"
• Width - 6.5"
• Class - III / IV
• Receiver Opening - 2"
• Capacity GTW - 5000lbs.
• Capacity TW - 500lbs.
• Drop - 5"
• Rise - 3.75"
• Ball Hole Diameter - 1"
• Pin Hole Diameter - 0.62"
• One Wrench to Tighten - Yes

8" Drop Specifications:

• Length - 13.5"
• Height - 2.5"
• Width - 9.5"
• Class - III / IV
• Receiver Opening - 2"
• Capacity GTW - 5000lbs.
• Capacity TW - 500lbs.
• Drop - 8"
• Rise - 6.75"
• Ball Hole Diameter - 1"
• Pin Hole Diameter - 0.62"
• One Wrench to Tighten - Yes

Installation Notes

Installation Difficulty:

Level 1Beginner

Parts Included

• Ball Mount