SummitView SUTV-8857 Adjustable Infrared Light Rear Vision Camera for 07-18 Jeep Wrangler JK with Factory Display Monitor
The Brandmotion Infrared Camera System is a rear vision kit for the Jeep Wrangler JK that includes a high-quality CMOS infrared camera with optional park lines. This custom designed infrared camera system for the JK allows you to have exceptional vision capabilities while backing up in low-lit surroundings. The adjustable neck allows the camera to adjust up, down, left and right to fit the camera head between different spoke patterns on most wheel designs, both factory and aftermarket wheels for the Jeep Wrangler. This kit is designed for vehicles with a factory display. The kit includes an RCA jumper harness to connect to vehicles with the factory display radio and flash module to activate camera input for radio. Also included in the kit is a camera head extension to accommodate offset wheels.
Note: If you do not use the included Program Module, an ECU flash by a dealership may be required in order to set up rear-view camera.
Fully Adjustable: The Adjustable camera bracket is designed to accommodate virtually any wheel design factory or aftermarket.
Infrared Camera: This infrared camera system allows you to have a bright, clear view even while backing up in low-lit surroundings.
Mounting System: This Kit includes a Unique high mount camera system with an innovative spare tire hub mounting bracket for Jeep Wrangler.
Added Features: This Infrared Camera system is waterproof, has Optional parking lines capabilities, and includes a jumper harness to connect to factory display radios.
Level 2Intermediate- Camera
- Chassis & Power Harnesses
- Extension Bracket
- 22--pin White Connector w/ Video RCA (for factory display radio)
- Program Module
- Detailed Instructions
- Features: Adjustable, Rear
- Shipping Weight: 2lb
- Shipping Dimensions: 13in x 7in x 5in (L x W x H)
Jeep Wrangler 2-Door (JK)
- 2018 Jeep Wrangler 2-Door (JK)
- 2017 Jeep Wrangler 2-Door (JK)
- 2016 Jeep Wrangler 2-Door (JK)
- 2015 Jeep Wrangler 2-Door (JK)
- 2014 Jeep Wrangler 2-Door (JK)
- 2013 Jeep Wrangler 2-Door (JK)
- 2012 Jeep Wrangler 2-Door (JK)
- 2011 Jeep Wrangler 2-Door (JK)
- 2010 Jeep Wrangler 2-Door (JK)
- 2009 Jeep Wrangler 2-Door (JK)
- 2008 Jeep Wrangler 2-Door (JK)
- 2007 Jeep Wrangler 2-Door (JK)
Jeep Wrangler Unlimited 4-Door (JK)
- 2018 Jeep Wrangler Unlimited 4-Door (JK)
- 2017 Jeep Wrangler Unlimited 4-Door (JK)
- 2016 Jeep Wrangler Unlimited 4-Door (JK)
- 2015 Jeep Wrangler Unlimited 4-Door (JK)
- 2014 Jeep Wrangler Unlimited 4-Door (JK)
- 2013 Jeep Wrangler Unlimited 4-Door (JK)
- 2012 Jeep Wrangler Unlimited 4-Door (JK)
- 2011 Jeep Wrangler Unlimited 4-Door (JK)
- 2010 Jeep Wrangler Unlimited 4-Door (JK)
- 2009 Jeep Wrangler Unlimited 4-Door (JK)
- 2008 Jeep Wrangler Unlimited 4-Door (JK)
- 2007 Jeep Wrangler Unlimited 4-Door (JK)
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review
SummitView Adjustable Infrared Light Rear Vision Camera Reviews
Install was somewhat easy, and to program the factory radio was easy as well… have to say was worth the $$ spent.
The camera is a great addition to my ‘18 Sahara Altitude JKU. Here is the issue I had with installation. The directions are pretty much easy to follow as far as the installation goes, the only thing that I could see to improve it would be to recommend or stating the best way to wire it is into the backup light wire which is white with a gray stripe and a factory ground by the left foot kick panel. Now for the programmer, this is where I had issues. First the directions I down loaded didn’t really explain how to install the programmer, and were a bit confusing. The programmer was not set for my application but I believe for the earlier model. Years of 2018 and lower. I have a later ‘18 JKU which uses the same programmer as the JL. I ended contacting Brandmotion who put me in contact with OBDGENIE who told me to down load the OBDGENIE trouble shotting app. After being in contact with the two
Manufacturers and using the app the camera finally worked. Turns out it was a programmer issue which was solved by OBDGENIE. Would I recythis product, yes , does it work , yes , was it worth it ,yes .
Took approximately five hours to install. This time frame included a lunch break, several visits to You Tube, final adjustments of the camera, and then putting everything away. There are several You Tube videos which were very helpful as the instructions are not that great. So far the camera view works well. Now to see if the product withstands the test of time.