Alpine KTA-30MW Mono Tough Pack Amplifier with SBV-10-WRA 10in Water Resistant Subwoofer for 07-18 Jeep Wrangler Unlimited JK
Alpine has been making sound and entertainment systems for years, and over that time they've gotten a lot of feedback from Jeepers and went the extra length to accommodate their needs. Many take advantage of their Wrangler's offroad capability where some just like to put the top down. In either situation your interior can be exposed to the elements. In an effort to accommodate you, the customer, Alpine has made the KTA-30MW Mono Tough Pack Amplifier waterproof with an IP66 rating that will easily protect it from any precipitation or standing water you might be driving through.
The Mono Tough Pack Mono Amp has a small footprint so can be conveniently mounted in the factory location with the factory hardware underneath the dash on the driver's side. Another notable feature Alpine takes pride in developing for their KTA-30MW amplifier is their proprietary DPP, or Dynamic Pulse Power, technology. This allows the amplifier to quickly increase the internal gain level when it's needed for louder and more abrupt audio signals. Once the amplifier recognizes the boost in signal the gain is raised effectively doubling the required amount of power.
Need the whole system? Check out the Alpine PSS-22WRA Waterproof Sound System.
Jeeps are not known for their factory stereo performance, and it can be hard to hear your tunes when driving with the top down. Take back the power with an Alpine 10" Water Resistant Subwoofer. This easy to install upgrade conveniently mounts under the passenger seat and out of the way. It is designed for use with the Alpine MRV-M500 Mono V-Power Digital Amplifier (sold separately). Unlike other aftermarket subwoofers, this Alpine unit is waterproof (IP66 rating), so you do not need to worry about damaging it in a rain storm or on the trail. Alpine backs this sub with a 1 Year Limited Warranty.
Installation Note: The Alpine 10" Water Resistant Subwoofer is designed for use with factory carpet. If your Jeep does not have carpets, additional padding may be required.
Not Compatible with 2-Door Wranglers
Alpine KTA-30MW Mono Tough Pack Amplifier
Class: D
Dynamic Pulse Power (DPP) Equipped: Yes
Power: 600W DPP x 1 @ 2Ω, 14.4V, ≤1% THD+N
Root Mean Squared: 300W RMS x 1 @ 2Ω, 14.4V, ≤1% THD+N (CTA-2006-B compliant)
Signal to Noise (1W into 4Ω): >83dB
THD (ref. 1W into 4Ω): <0.1%
Frequency Response: 20-400kHz (+/- 1dB)
Waterproof Rating: IP66 rating
Inputs: Speaker/RCA inputs (selectable, High range=0.5-10V, Low range=0.2-4V)
Sound Control: LP filter - Off/LP, Fc = 50-400Hz @ -24dB/Oct. (variable); Input gain settings (variable); Bass EQ: 0 to +12dB, Fc = 50Hz (variable)
Chassis: Cast Aluminum
Alpine SBV-10-WRA 10in Water Resistant Subwoofer:
Speaker Size: 10 inch
Location: Under passenger seat
Recommended Amplifier Size: For use with 500 Watt amps
Vehicle Specific: For use with 4 door Wrangler JKs only
Rated Waterproof: IP66 Rating
Peak Power: 1050 Watts
Root Mean Square (RMS): 350 Watts
Nominal Impedance: 2 Ohm
Frequency Response: 45-200Hz
Wiring Pigtail: OEM-grade Molex 2-pin connector
- Size: 10"
- Location: Front Seat
- Shipping Weight: 25
- Shipping Dimensions: 20in x 19in x 16in (L x W x H)
Jeep Wrangler Unlimited 4-Door (JK)
- 2018 Jeep Wrangler Unlimited 4-Door (JK)
- 2017 Jeep Wrangler Unlimited 4-Door (JK)
- 2016 Jeep Wrangler Unlimited 4-Door (JK)
- 2015 Jeep Wrangler Unlimited 4-Door (JK)
- 2014 Jeep Wrangler Unlimited 4-Door (JK)
- 2013 Jeep Wrangler Unlimited 4-Door (JK)
- 2012 Jeep Wrangler Unlimited 4-Door (JK)
- 2011 Jeep Wrangler Unlimited 4-Door (JK)
- 2010 Jeep Wrangler Unlimited 4-Door (JK)
- 2009 Jeep Wrangler Unlimited 4-Door (JK)
- 2008 Jeep Wrangler Unlimited 4-Door (JK)
- 2007 Jeep Wrangler Unlimited 4-Door (JK)
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review