2.5” Standard Load Coil Springs These coil springs are optimized for an AEV-spec Wrangler with typical gear/cargo inside. This means the ideal ride height, handling, and overall performance will be achieved on a vehicle with steel bumpers, winch, full-size spare, and recovery gear (+0-400 lbs. over factory weight).
Upgraded Components: Rear trackbar extension included to correct the rear roll center while also generating a better turn-in response. Extended length front and rear sway bar end links to compensate for the additional lift height, while new front and rear bump stop spacers improve bumper/axle contact under full articulation.
ProCal SNAP: Included for quick and easy speedometer recalibration.
AEV's JL Jack Base: For added safety and stability when changing a 35” and taller tire with the factory scissor jack.
Many states have laws that limit the maximum height of a lifted vehicle. Never exceed the legal height limit.
- Maximum Recommended Tire Sizes:
- Sport/Sahara (North America): 35×12.50R17
- Rubicon (North America): 37×12.50R17
- Sport/Sahara/Rubicon (Export): 35×12.50R17
- Coil Springs
- Bilstein Shocks
- Control Arm Geometry Correction Brackets
- Rear Track Bar Tower Extension
- Front and Rear Sway Bar End Links
- Front and Rear Bump Stop Spacers
- Rear track Bar Relocation Bracket
- Jack Base
- Shims
- ProCal SNAP
- Hardware Pack
- Features: Dual Rate Coil Springs
- Shocks Included: With Shocks
- Max Tire Size: 37
- Lift Height Range: 0 - 2.5 inch
- Shipping Weight: 124lb
- Shipping Dimensions: 48in x 40in x 24in (L x W x H)
Jeep Wrangler Unlimited 4-Door (JL)
- 2025 Jeep Wrangler Unlimited 4-Door (JL)
- 2024 Jeep Wrangler Unlimited 4-Door (JL)
- 2023 Jeep Wrangler Unlimited 4-Door (JL)
- 2022 Jeep Wrangler Unlimited 4-Door (JL)
- 2021 Jeep Wrangler Unlimited 4-Door (JL)
- 2020 Jeep Wrangler Unlimited 4-Door (JL)
- 2019 Jeep Wrangler Unlimited 4-Door (JL)
- 2018 Jeep Wrangler Unlimited 4-Door (JL)
- Shared By Others
- Share a Photo
- Ask a Question
- Write a Review