Reviews for Crown Automotive RT27049 Front Grab Handle Set for 07-18 Jeep Wrangler JK

Solid steel. Nice additional that is functional as well. Fairly easy to install. Would recommend first starting the new bolts without the handle to check bolt angle as the side bolt angles uphill.

I can't imagine that the leading brand is any better quality. These are solidly built and from reading reviews of both brands, no easier or more difficult to install. Took me about 90 minutes, but that is because I left nothing to chance and used a tap to clean up the threads before installing. If I could do 1/2 stars, I would remove a 1/2 star for not having color options for the grips. otherwise, I love these!

Why pay more than double? These are sturdy as can be! Lubed the threads with some WD. Make sure you start with the bolt going in horizontally first. Get a few threads on there then go on to the vertical. Then tighten down.

Very solid, high-quality grab handles. Used the instructions for the expensive brand for installation, as the kit did not come with any. I found install to be easy, just go slow and be patient. Going slow, took about 10 minutes per handle. Can't imagine the "original" brand is any higher quality. These were 40% of the cost of those. Great product!

Could have used some installation manual, but even though none came in the box, I was able to figure it out myself. It takes a little work to get both bolts in thightly

These are high quality; durable grab handles! 1/2 the price of other comarirable products. Installation took about an hour for the pair without instructions. I felt the insulation was pretty self explanatory but there are YouTube videos if needed. Overall I would recommended this product.

These are awesome. Very high quality. Literally a steal for this price. If you’re looking for some grab handles stop searching and add these to your cart, you won’t be disappointed. Quick install tip: cram some paper or something in the plastic panel to keep the factory bolt from falling down in the space. If I hadn’t done so I would’ve lost both of mine. Also found it much easier to install the horizontal bolt first.

These grab bars are great and easy to install. Simple 13MM socket and a hex and you are in. You just need to slide top the and bottom in at the same time. Best price on the net.

These are heavy duty. The install can be difficult. I spent several hours trying to line them up. I finally cut off 1/4” off the spacers and everything lined up good. So much easier.
With the shorter spacers the handles do not interfere with the visors.
It would be helpful if the hex bolts were tapered to help lining up the spacers.
Overall they look good.

Good product well built, i screwed up install. Cross threaded on my jeep had tap it, still like product just be careful and do the top first.