« Back to product
Miguel T.
Is it compatible with my Rubicon 4xe model?
Yes, it is. Thanks for your inquiry.
Amit G.
Is it compatible with 2024 Willy's 4xe
Yes. Jeep does show 2024 coverage for the switch bank. Thanks for your inquiry.
Jeffrey K.
I've been told by a jeep dealership I can not install the Mopar switches since I have the 3.0 Diesel. For some reason, it has resulted in fires when installed after manufacturing. Can you confirm if this will or will not work with Diesel Engined Wranglers and Gladiators?
Version of the part ending with E is compatible with 3.0 Diesel platform. Both black and silver options should be the correct model generation ending in E. 82215190AD and earlier models are not compatible with Diesel models. Thanks for your inquiry.
David N.
Will I need to wire in a relay and inline fuse when connecting two auxiliary lights that draw 1.5 amps each to one of the switches ?
That should not be needed. Thanks for your inquiry.
Marc A.
I have a 2019 Jeep Wrangler Rubicon with a manual transmission.
Is there a aux switch kit I can install??
This model with the Rubicon option selected will fit your model regardless of the transmission. Thanks for your inquiry.
Daniel B.
I have a sport S that came with the switches and has the black trim, however I added the rubicon locker switch and the trim is chrome so now It doesn’t match as well as I would like It to. Do you guys sell just the chrome switch that I can swap out in the dash to have It match?
No, the switches are only serviced as a fully assembly.
Manuel G.
Is it compatible with the European diesel engine 2.2 multijet 200 hp? I ask because elsewhere I read "not compatible with diesel engines".
No, according to Jeep this is not for use on Diesel Engines.
Scott H.
Do these require a code to program them? My dealership said they couldn’t do a flash without the code for the six switches?
Yes,
1. Log on the https://dealerconnect.chrysler.com
2. Click on the Service tab. Inside the Warranty Administration box, click on “Vehicle Option Updates”.
3. On the Vehicle Option-Add a Sales Code Screen, enter the VIN of the vehicle and click View button.
4. On the next screen, which shows the VIN that was entered, select the sales code LH2 (aux sw 1-4) from the list of Available Vehicle
Options. Once LH2 (aux sw 1-4) is highlighted, click the ADD button.
The sales code will now appear in the box on the right side under Selected Vehicle Option. Click Save.
1. Log on the https://dealerconnect.chrysler.com
2. Click on the Service tab. Inside the Warranty Administration box, click on “Vehicle Option Updates”.
3. On the Vehicle Option-Add a Sales Code Screen, enter the VIN of the vehicle and click View button.
4. On the next screen, which shows the VIN that was entered, select the sales code LH2 (aux sw 1-4) from the list of Available Vehicle
Options. Once LH2 (aux sw 1-4) is highlighted, click the ADD button.
The sales code will now appear in the box on the right side under Selected Vehicle Option. Click Save.
RON C.
Can A Tazer Mini be used to flash it?
Yes the Tazer Mini can be used to activate/deactivate the switch bank.
Matthew D.
I understand it provides (2) 40A circuits and (2) 15A circuits. Are they pre assigned to specific switch numbers or can you customize which circuit rating you want assigned to each switch number?
See page 23 of the installation instructions. The amps are controlled by the relays that are mounted under the hood. You can reconfigure them to your liking.