Skip to main content
Home » Jeep Wheels » Alloy Wheels » Quadratec Hardrock Wheel
« Back to product
I have a stock 2019 JL unlimited and I’m going to put the dynatrac endurosport 2.0 lift kit on and was wondering if I put nitto mud grappler 35x12.5 17’s would they fit? I have already replaced front bumper with a stubby and added a winch. Will these tires fit with out rubbing?? I don’t want wheel spacers. If not what rim size do you suggest?
That should fit comfortably for you. Thanks for your inquiry.
Will these rims SAFELY fit my original BF Goodrich All Terrain T/A tires LT 285/70R17?
Yes, they will safely fit, Thanks for your inquiry.
In reading reviews it appears most people buying these wheels are using them on just over stock tires. I just ordered a set of 4 wheels, as well as 4, 35x12.50x17 mud grabber tires. I'm questioning if the tires may be to big? I am putting the Mopar 2 inch lift on our 22 Rubicon and really don't want to trim fender liners.
No, they will not be too big for the wheel. The backspace variation from stock the wheel has should allow 35x12.50 comfortably. Thanks for your inquiry.
I have a 2017 Jeep Wrangler JK with P255/75R17 OWL On/Off-Road Tires. Will my tires fit these wheels?
Yes, they will fit. Thanks for your inquiry.
Hi, I have a 2015 4 door with P255/70R18/112T/M+S tires; will these Hardrock Wheels in 17x8.5 fit my tires ?
No, your tire will require a wheel that's available in 18" sizing. Thanks for your inquiry.
I have a 2021 Gladiator Sport, stock no lift. What would be the recommended tire? I don’t want the wheels sticking out from the fender, not sure if I should go with 285/70 or 265/70. Thanks
With a 285, The top of the tire to the fender well is: 0.3" Closer. The inner sidewall to the suspension and frame is: 0.78" Farther Away. The outer sidewall is: 1.98" Farther Out from stock With the 265, The top of the tire to the fender well is: 0.25" Farther. The inner sidewall to the suspension and frame is: 1.18" Farther Away. The outer sidewall is: 1.58" Farther Out from stock. Thanks for your inquiry.
Hi, I have a 2013 Grand Cherokee. How far will these wheels stick out past my fenders? I see a few pictures with these wheels installed on the WK2, but nothing that really shows if they'll be past flush with the fender. - Thanks
From stock 17" wheels with 56.4 positive offset, your outer wheel edge would be 2.6" farther outward with same size tire as stock. Thanks for your inquiry.
I have a 2015 Jeep Wrangler JK unlimited sport with the factory alloy wheels. I have two questions: 1) are the wheels hubcentric for this vehicle? 2) can you use the factory lug nuts and lock nuts for this wheel?
Our wheels are hub-centric in design, and they are able to take factory lug nuts or use our acorn and spline drive lug nut varieties. Thanks for your inquiry.
How much will the tire stick out past the factory fender?
The wheel backspace is less than most wheels factory backspace by 1.3" if the OE backspace is 6.5" like most factory wheels have. Some may have 6" of backspace. Compare your wheel backspace and this will push out further by either 1.3" or if you only have 6" backspace, this would push out .8" from a factory wheel. But this wheel is also 1" wider than 7.5" rim almost all Jeeps have factory so it will hang out the backspace difference and the added inch of the wheel size. Taking comparison measurements vs what you have factory, will always be your safest way to determine how far tread might stick out from your fender flares. Thanks for your inquiry.
Will these work with 295/70R Nitto Trail Grapplers? If not can you recommend something similar that will fit?
That will likely be just perfect for running some 33's. I would suggest a leveling kit if you have a JK. JL is fine stock with 33's. Thanks for your inquiry.