Reviews for Black Rhino Armory Wheel for 07-20 Jeep Wrangler JL, JK & Gladiator JT
The best
Very nice wheels. Match almost perfectly to Gobi.
The wheels look amazing. My wrangler is Gobi (tan) and it matches perfectly. Looks great. Mounted with 35s and 2.5" lift.
Great looking wheel and made my Jeep look the way I wanted it to look. Love the wheels!
I love the way the wheels look but after 4 weeks the small bolts going around wheel are rusting. I’m sure by end of the year they are going to look horrible
Mall Crawler wheels as they get lots of attention. Not recommended for offroad use as they are a soft alloy and bend easily when aired down. I don't mind the gouges or small areas bent but a third of radius of bead bending means it has to get replaced. I also have the internal hex bolts rusting but figured I removed the paint on the trail and I have to hit a lot of parts with a spray can.
Great looking wheels. its unfortunate i had the same problem on the ones i had purchased for my 2017 JkUR after a few months the outer bolts began to rust inside and it really looked horrible. after contacting customer service about it they sent me these cheap black plastic plugs to cover it up like thats gonna help the rust. even tried to see if they could be removed which is a no go. id thought by now they would have corrected the problem and used better quality paint.
I've had the same issue with oxidation on the wheel itself and rusting inside the bolt pattern holes. Customer Service was outstanding in sending replacement set. Unfortunately, 4 months later they are now showing rust deposits inside the bolt pattern holes.
Great looking wheel when it was new. six months in the small bolts started to rust. cheap china paint
These now take top spot on my list of most disappointing parts. They look so awesome but the quality is just so poor. I had these mounted in February (9 months ago) and have put approx 2700 miles on them, the majority of which were during the summer (VA & WV). The 6 large bolts are already faded gray and all of the bolt around the outside are already rusting to some degree or another. I made the switch from steelies because I was tired of busting rust every summer - oh, the irony. The installer mentioned that he couldn't get a regular sized socket in a couple and had to switch out to a thin wall for the last two after two had already been mounted. I didn't verify myself, because it was too fixated on the powder coat coming off around the lug nut holes. I wanted to install without the black caps, but that wasn't an option from the start. Really, really disappointing..