Skip to main content
Home » Jeep Lift Kits & Suspension » Shocks » Twin Tube Shocks » Quadratec Maximum Duty Hydro 7.0 Shock Kit
« Back to product
Hi, I have a 05 Wrangler TJ, all original, just wondering these shocks are fit for my Jeep ? Thanks.
The first option selection in the drop down menu for stock ride 0" lift height to 1.5" of lift will be a compatible for your stock Jeep suspension. Thanks for your inquiry.
I have a black diamond 3in lift. Will these shocks be at their limits. Would 3-6 in shocks be a better choice or just a stiffer ride. 2003 tj
2-3" selection would be correct unless your lift was 3.5" and greater. Thanks for your inquiry,
This fits on May TJ 06 6” lifted
Yes, if you select the correct 6"-8" lift range. Thanks for your inquiry.
Hi I have a 98 XJ and I have a 3.5 in lift what shock will be best for the my jeep and I do most road driving to commute to work.
16116-0412 called out for 3.5-4" of lift would be correct for your application. This Hydro shock will have better road manners for daily driving than a Nitro shock will for most drivers. Thanks for your inquiry.
Are mounting hardware and boots included in this kit
Yes, both are included. Thanks for your inquiry.
I have a 2006 Rubicon Unlimited that has a Rubicon Express lift installed by the previous owner. My front springs are 15 inches and my rear springs are 11.75 inches; according to charting, this would translate to a 3 inch lift. The Maximum Duty Hydro 7.0 Shock Kit has a choice of sizes 2-3 or 3-4.5 inches of lift. Which would be the better choice? The existing shocks are all seeping and unreliable and am not confident that measurements from these would be valid.
If most of you driving is on road, the 2-3" sizing should be more appropriate. If your driving demands more shock travel, go larger with appropriate extended bump stops. Thanks for your inquiry.
For a 00 Wrangler with no lift, used for cruising, not very much off road at all, would you recommend the Hydro or Nitro shocks?
Hydro will be the best for daily road comfort.
The installation instructions call for using a vice to put the rear shock mounting bars into the bushings. Do the rear shocks come with the mounting bars?
The bar pins for shock mounting are included. Thanks for your inquiry.
I have a stock '99 XJ with no lift kit installed. What size shocks would I need?
You need the shocks for 0-1.5" lift height.
replacing shocks on my 1999 jeep wrangler I don't know what lift it has on it but the shocks measure Front 14 1/2 - 24 1/8 rear 14 13/16 - 24 7/8. would these work or do you have some that would work
Based on your measurements you have 3.5-4 inches of lift. Part# 16116.0412.14 would be the appropriate shock kit.