Reviews for Crown Automotive 52002625 Transmission Mount for 87-95 Jeep Wrangler YJ with 2.5L, 4.0L or 4.2L Engine

Good fit

Fit nicely. No more transmission wobble when shifting low gears.

Price

great fit

Good

Fit my 1987 YJ perfectly.

The mount itself looks pretty solid and would probably last for a few years of on-road driving. I changed back to rubber engine mounts and trans mount due to the excessive vibration from the Prothane mounts I installed a few years ago. One feature I found missing on this trans mount is the mounting holes that go over the studs on the trans are not slotted to allow a small amount of side-to-side movement to help align the mount to the skid plate. The main issue I have with this trans mount that made them unusable and required a return is that the main mounting studs stripped very easily when I went to tighten the nuts under the skid plate. I used the same hardware as the mount I removed and the nuts threaded on properly until I tried to tighten them. The nuts suddenly became loose and would not tighten any further. It appears the threaded studs are made of very soft material and tightening the nuts actually damaged the threads. Hope this is a temporary issue as I often purchase quality Crown products. Update provided by customer. I used the hardware from the mount installed and later determined that it was the wrong hardware. The nuts threaded on pretty well, but destroyed the threads of the mount bolts when tightened. The new mounts required M10 nuts and the existing poly mount used 7/16" nuts.