Reviews for Rugged Ridge 13201.03 Replacement Seat Slider for 76-95 Jeep CJ-5, CJ-7, CJ-8 Scrambler & Wrangler YJ

good product. I was a little disappointed when one of the sliding pieces with tiny ball bearings in the rear came out as I was installing. still works though.

Worked perfect easy to install

Nice product, had to file down some of the teeth that interlock with the slider mechanism. They were not quite lined up and it was causing it to bind. Used a Dremel for this.

Nice product, had to file down some of the teeth that interlock with the slider mechanism. They were not quite lined up and it was causing it to bind. Used a Dremel for this.

I purchased a pair of these to replace the worn out ones in my 1988 Jeep Wrangler Laredo. One concern I had was that no mounting screws/bolts were included. Mine were rusted in place and would not come out. I contact the Quadratec support online. There were helpful only to tell me that they did not a bolts number number. They did give me the toll free number to the manufacturer. I was able to find a bolt by trail and error. This was NOT a problem with Quadratec. With the new seats and the new sliders, the adjustment bar seems to be a little shorter or it work better if it was bent downwards some to make room to be able to pull the adjustment bar upwards. This other than this the sliders work great just hard to get the adjustment bar to pull up to be able to the seat.

The rails work great but the instructions say to reuse the bolts that hold the rails to the base. The issue was my OEM bolts where standard threads and the rails use metric.

bolt pattern did not line up with factory seats, other than that works great

Ball bearings fall out first time moving seat.

Sames to be okay. Not sure how good it works yet because Im waiting on seats.

Will not fit my stock 1994 yj seat. Shipping box was also packed poorly causing the bolts to be damaged. Numerous loose ball bearings in the box.