Skip to main content
Home » Jeep Wheels » Alloy Wheels » Fuel® Off-Road Beast Wheel
« Back to product
2020 Gladiator Overland (no lift): Is the offset on these 18x9 wheels (4.5 backspacing) -13mm? How far out will the sidewall move with these wheels and 285/75/18 tires? Can this setup be installed without rubbing? (no extreme off-roaming)
The -13mm offset pushes the wheels further out than stock wheels, resulting in the sidewall moving out approximately 1 to 1.5 inches further compared to stock wheels. This will give a more aggressive stance with the tires extending beyond the fenders by that amount, especially with a tire width of 11.2 inches. ince you're not doing extreme off-roading and with this setup, you should not experience any significant rubbing during regular driving or light off-road conditions. The 4.5 inches of backspacing and the -13mm offset provide enough clearance to avoid major issues. However, in extreme articulation or full lock turns, there might be minor rubbing on the inner fender liner or sway bar, but it should be minimal given your usage.
I have a 2016 2 door Willys with a Teraflex ST2 2.5" lift w/Falcon 2.1 shocks. Will these wheels fit? Also, if i use Mickey Thompson Baja Boss 35 x 12.5R17, how much wider would this set up be from what i currently have (stock Willys wheels with 255 x 75R17). I have stock fenders. Thank You
Your outer sidewall would sit out 3.53" farther not even taking into account the added bulge from going from a 7.5" wheel to a 9" wide. Expect approximately 4.5-5" of total added width from the stock wheel and tire to your desired wheel and tire. Your inner sidewall will gain 1" of clearance with the backspace variation. The 2.5" will clear for daily driving, but if you are planning on hitting aggressive trails 3.5" of lift would be best. Thanks for your inquiry.
I own a 2021 Wrangler (JLU) Rubicon and I am considering purchasing these wheels. Are there special lug nuts that must be used for this wheel.
Spline drive lug nuts from brands like Method and our own set are a good match for the narrow lug openings on this wheel. Thanks for your inquiry.
I see diffferent offset options. What's the offset for the 17x9 with 5in of backspace? And what's offset for 17x9 with 4.50in of backspace?
0 offset with 5" of backspace, and -13mm for 4.5" of backspace. Thanks for your inquiry.
What is the country of manufacture for these wheels? Thanks!
These wheels are manufactured in the USA.