Skip to main content
Home » Jeep Wheels » Steel Wheels » TACTIK D Window Classic Wheel
« Back to product
Can you get these in White?
Not at this time.
I have a 2000 xj with a 2.5 lift. I run 31x10.5 tires and previously on stock rims had no rubbing issues. Put on a set of American Racing rims and now rub on the wheel wells. The tires stick out beyond the wells at least an inch, obviously the wrong offset, (bought them used) my question is will the 8" wide tacktic's stick out beyond the wheel wells with their offset?
This wheel has .98" off backspace push out for the inner wheel rim for turning radius considerations. It is also one inch wider that a stock rim. 2000 XJ has a 7" wide factory wheel with +25mm offset. If we know what size and backspace American racing wheel you have, we will better be able to compare whether your rub concern will still be present. Thanks for your inquiry.
which width do you reccomend for a 31x10,5 Tire? and are these the factory backspacing? never had a problem with rubbing on a 2000 XJ until I switched wheels.... Thanks!
15x8 is best for a 31x10.5.They are one inch pushed outward on the inner edge for turning radius clearance, and this wheel is 1" wider that a factory 7" wheel with +25mm offset. Thanks for your inquiry.
Which one is best to run 33-12.50-15'
A lot of tire manufacturers will list that a 33x12.50 R15 should be on an 8.5-11 in rim width range. In that case the 15x10 is best. It is safest to check the spec called out by the tire manufacturer you use. Thanks for your inquiry.
I have some rubbing at full turn on Jeep TJ control arms with stock wheels on a 31" tires. Would the offset on these be enough to eliminate the rubbing?
The backspace will be 1.25 less than a stock TJ wheel. You should not have the rubbing after use of these wheels.
Would this be a good rim for a 265/75 tire
If on a 15" wheel, yes that metric would be just fine.
center bore?
3.30" Thanks for your inquiry.
What is the proper wheel back space for a 2000 wrangler sport 4.0?
If the tire is stock or narrow about 6 - 6.5" and if you are running a 31-33, running 5.2 inch or lower number as the tire size is bigger from appropriate clearance from internal rubbing at full turn.
Will 33 x 12.5 x 15 tires fit on 15” x 8” rim or should I go with 15 x 10
Check the spec chart for a tire manufacturer you choose but in most cases they call for 8.5" - 11" wide wheels for 33 x 12.50. If that is the case, 15x10's a the better way to go. Thanks for your inquiry.
Do I need to pickup wheel specific lugs for these? Or can I get away with stock? I've seen stock lugs back off aftermarket wheels before due to a different taper. If so, please provide a link to lugs I can use~TIA
Stock lugs are just fine, or if you like a Black lug or security option, our acorn and spline drive lug nut sets are also great options. Thanks for your inquiry. https://www.quadratec.com/products/92806_90XX_PG.htm is the spline style which are in stock.