Skip to main content
Home » Jeep Wheels » Steel Wheels » TACTIK Circle 8 Classic Wheel
« Back to product
Does a 15 x 10“ rim fit on a 35 x 12 1/2 x 15“ tire
Yes, the 15x10 would be correct for a 35x12.50 on a 15" wheel. Thanks for your inquiry.
I have a base YJ Wrangler (no lift kit) what size tire would work best with these wheels?
28" is the outer diameter that is stock on that Jeep, but up to a 30 x 9.50 is okay with no lift. 31" I would suggest a shackle lift of add a leaf. That is assuming the springs are not completely worn out and need attention due to sagging. Thanks for your inquiry.
I'm needing rims where the tire is tucked inside factory fender flares. Are these rims 15x8 offset to allow for this ?
The backspace on this wheel is less than factory so this will be out wider than stock. Backspace closer to 6" will keep you in the fender flare coverage area depending on the tire size used. Thanks for your inquiry.
What is the offset on the 15x8s
These wheels have a 4" backspacing, so the 15x8" wheel has zero offset.
Do these steel wheels come with center caps ? Or should order some when I order the wheels ?
Includes Center Cap
What is the weight, per wheel?
15" x 8" approximately 26 lbs. 15" x 10" approximately 29 lbs.
what is back space on steel rims
Backspacing is the measurement for the wheel mating surface to the rear of the wheel.
What is a standard valve stem? .625 or .453. Or ??? Wich one fits these rims
The standard valve stem size is .453 and that would fit this wheel.
This may be a dumb question but if i have tires that are 15x8 these rims will or will not fit it?
These wheels will accommodate any tire that is within 3" of the wheel and a 15" radius, so on an 8" rim max tire width recommended in 11" wide.
which valve stems fit these rims
Any standard valve stem will work in these wheels.