Reviews for OMIX 11209.01 Windshield Hinges in Black for 76-95 Jeep CJ-5, CJ-7, CJ-8 Scrambler & Wrangler YJ

Fit very well.

allen head flush mount screws instead of factory torx screws. Be very careful not to strip them out

Perfect fit

Although these are half the thickness of the original hinges, they appear to be well made.

I installed the "cr laurence window kit" that quadratec sells and used these brackets. I don't know if it was the frame or the brackets, but it didn't line up as nicely as I wanted to. I know the nuts in the window are temporarily tacked in and you need to break that tack weld so they can wiggle a bit. But the issue were on the side bolts and were close enough to get bolted in but didn't bolt up as nicely as stock.

The other thing is when I was tightening one of the bolts, I started to strip the Allan head. I'm hoping that I can extract it OK when I need to later on in life. I think I will, but just another thing why I wasn't totally happy with these brackets.

No backing nuts for upper bolts, I guess it's possible someone drilled the thread inserts out on my vehicle - if they were ever there I don't know. The ones I'm replacing had backing nuts.

Garbage. Three holes line up and one doesn’t. Makes it impossible to completely bolt together without enlarging the single hole. Using original Jeep window.