Reviews for Crown Automotive 55055032AE Passenger Side Headlamp Assembly for 97-06 Jeep Wrangler TJ & Unlimited

Just received passenger and driver assemblies. On both of them there are supposed to be 3 attachment points to the adjustment screws. Almost all of them are stripped out and can't be used to hold the outer ring in place. Even if it weren't stripped, they wouldn't last very long unless you put bolts and washers in front and behind the adjustment screw which would render the adjustment screws useless. Th philips screws that came with it to replace the torx screws that hold the bezel in place are made from very soft metal and easily stripped. You have to re-use the (6) nuts (3 bolts on each side) from the old assembly to attach the headlight in place. If yours are rusted, expect to make a trip to the store with the assembly in hand to find some that fit.

bought both the left and right out of the box the looked very well built till feather in 3 of the adjustment screws where pulled out of the bucket holders and were stripped out had to drill and pin them to get them to stay very sad for how much they cost would not recommend

Fit was not good. Very difficult to get chrome ring back in properly and just as difficult to get to adjusting hardware.