Reviews for Mopar 55078114AB Headlamp Adjustment Screw for 07-18 Jeep Wrangler & Wrangler Unlimited JK

Needed to allow full adjustment of JK headlights.

It is hard to get elsewhere.

Adding these to get better adjustment of the headlights

I installed one one each of these MOPAR 55078114AA in my JK headlamp buckets to provide precise horizontal adjustment of headlamps. I currently continue to use my 30+ year old, 7 inch round CIBIE Balon Incolore Bloc Optique (Bobi) H4 DOT compliant headlamps in my JK, running through HELLA relays, now with optimally adjusted low and high beam aim. The interior of these headlamps have aged slightly and will be replaced with also DOT compliant QUADRATEC Gen II LED headlamps in the coming months. Since my headlamp buckets already modified with these horizontal adjusters in place, installation and correct aiming of the LED headlamps will be accomplished in minutes.

its a screw. it screwed in and screwed out. adjusted the lights appropriately

Awesome product that FCA should have put on the vehicle to start with! If you've tried to adjust your headlights from side-to-side, you've noticed that there actually isn't an adjusting screw on either bucket! These screws replace the goofy non-adjustable plastic post that FCA installed to pinch a couple pennies, and allow you to aim the headlights where they need to be pointed!

Was a perfect fit inside the headlight compartment

Simple to install and work as intended. I replaced the "fixed" vertical adjustment screw on each headlight on my Wrangler with one of these to allow for vertical adjustment, if needed. Works great.

I needed this to adjust some KC led head lights I installed. Now I have vertical and horizontal adjustment on my head lights

A must for replacement headlight adjusting. Super easy install, just screw them in creating a new thread path.