Reviews for Quadratec 12110 0513 Windshield Light Mounting Bracket for 07-18 Jeep Wrangler JK

Installed easy and love how well they worked.

Nice mounts, and for a good price.

Quality product, included padding between bracket and vehicle a must, easy installation with included tool.

Good sturdy brackets...but should include longer bolts.

East to install and built sturdy with a nice black finish. Keep in mind that the factory bolts are reused, and in my experience, at least two of the bolts (the lower bolts on each bracket) were too short to give me a good feeling about the amount of threads that were engaging. One of these bolts would not engage at all even with pressing it into the hole. I had two slightly longer bolts of the same design from a previous jeep, and ended up using them. Its nice they include a torx head for the install, but they probably should include longer bolts to make this a bit better product.

I only had a problem with 1 bolt being too short, but I found out that the 6 bolts that hold the hard top on (inside rails) are perfect for holding these brackets on. They're a few threads longer and I had replaced them with one of the knob bolt kits sold on this site so they were available to reuse.

Infuriating the stock screws are too short , washers on stock screws do not come off which is the problem. If you happen to live where extended bolts are hard to get whole project grinds to a halt. Would be happy to pay extra for longer bolts - mine had rubber gasket attached.

Stock Screws on my 2017 Rubicon were not long enough. You should include longer hardware, you are adding thickness which should be accounted for with the proper length torx bolts.