Reviews for Noram Auto Body Parts 16750-L Drivers Side Replacement Steel Rear Fender Panel for 76-95 Jeep CJ-7 & Wrangler YJ

Proce and availability

Price\

Just as advertised, good quality.

Flimsy piece of sheet metal but easy to work with because of this. I only needed a small section of this panel wouldn’t recommend if you actually need to replace this whole panel.

It’s decent enough to make work but it needs cut and shaped to fit correctly. Fender area is bowed out quite a bit. If I could upload pictures I would.

Not bad just hard to make work.

The metal is too thin to be a patch panel - no matter how good a welder you have, the metal just won't work - you are better off going right to a metal store and buying sheets of metal.

This is thinner than factory body. The corners in the wheel well are square not rounded as in the drawing. See in the space around the Door opening? the piece is exactly like the drawing. The curved part around the back of the door does not have the lip and the corner at the top is open, as in it does not have a complete rounded corner, it has a gap.

The way this can be used as a whole is as a skin, to cover the whole side of the jeep.I don't know how to a skin work so then it is only good for cutting pieces out and you are better off buying a sheet of thicker steel and cutting that to fill in with. The cost of this thin steel is not worth it.

The shipping came in a thin cardboard box so all three different parts i purchased were bent up during shipping. I would have returned these parts if i had opened them before the 30 day return policy.

I will post some photos.