Reviews for Crown Automotive Windshield Hold-Down Set for 55-95 Jeep CJ & Wrangler YJ

They are OK but don't like the standard black metal finish. The originals were finished with a rubber coating, these have a “cheap” look and feel to them. May do a rubber dip before installing.

Exactly what I was hoping for other than the middle tie down was all scratched up and the passenger side tie down was bent when I received them in the mail. Other than that the rest of the peices were great and mounted just like i had hoped.

average quality for the price.

Not a great replacement for the original. There is no flange to anchor the loop on the hood. If you tighten up the nut it just tightens up on the plastic coating. I'm using the black nut that was supplied and the black washer on the outside and new stainless washers and nuts on the underside.

Doesn't fit the original holes. Quarter-inch off.

The pitman arms are fine, the hood rests are undersized and do not have a lip to stop the nut, so you are left with a wobbly windshield rest, that seemingly cant be tightened appropriately

I agree with both reviews. I had to used supplied nut and washer and get new nuts for underside. Not happy with this at all.

not formed to contour of hood bent hood when tightened down

I really disappointed, it's not designed properly like the original one.