Skip to main content
Home » Jeep Armor & Protection » Side Steps » Mopar Factory Style Side Steps
« Back to product
I just need the 6 bolts for the side step mounts do you carry them
Yes, Please Click Here for the Steps and Spare Parts. (Bolt is 6105103AA)
Do these add any protection like rock sliders or are these just cosmetic?
These are only designed for assisting into and out of the Jeep. They do not provide any crushing protection to the rocker or pinch weld. They do however block rocks and debris from coming from the front wheels and tires.
Is there a list of bolt sizes for the brackets to mount to the steps? There are 6 (Larger) recessed bolt locations to mount the bracket to the step (3 per step) and I haven’t been able to find information for what is needed. Thanks!
For any replaceable hardware associated with the JK Wrangler Side Steps please see : https://www.quadratec.com/jeep-replacement-parts/wrangler-jk/running-board-side-step-parts
do these fit a 4 door 2019 unlimited rubicon? also, is this a set for both passenger and driver side
No, the body mounts changed on the JL Wranglers. You will need 82215164. They can be installed on a Rubicon, but you will have to remove the Rubicon Rock Rails in order for them to fit. They are sold in a set of two with installation hardware.
Do you sell just the mounting brackets?
We can get the hardware in terms of bolts, but are unable to get just the brackets. Jeep only services the brackets with the steps.
Can I order just the right (passenger side) step?
You can purchase the passenger side individually, but it is cheaper to purchase the set with new hardware over the part itself. https://www.quadratec.com/products/12112_0412_07.htm
Do these running boards fit a JL?
No, for the JL Wrangler you need #82215164
Is the mounting hardware available separately? My 08 jk brackets are rusted badly. Thanks
The M8 bolts are 6105103AA (attach to body) the Clip Nuts are 06101833. Hope this helps. You can find these parts on our website
I have a 2007 JK it seems the spring clip is for the front and middle positions and there should be a threaded body hole for the rear. The M8 x 1.25 x 30 bolt seems to big for the rear hole and I dont want to strip it out. Can someone confirm that the M8 bolt should go in the threaded body hole located in the rear?
Yes, The supplied bolts are used in all 3 vertical positions on either side.
What size are the bolts
M8x1.25x30.00