« Back to product
John N.
2007 JK Wrangler w/ stock 16” steelies.
Will be running a 33x12.5 on a 15” wheel w/4” BS. Will this leveling kit allow me to run that set up without rubbing?
![](/sites/all/themes/quadratec/logo.png)
Likely not. 15" wheels will not clear brake calipers on JK models. Thanks for your inquiry.
Ted B.
Will this kit work without whee spacers with factory wheels?
![](/sites/all/themes/quadratec/logo.png)
No. Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters (# 1055000) for stock wheels. Thanks for your inquiry.
Daniel R.
2011 Sahara with 18” wheels. If I go with 33” tires on my stock rims and this spacer kit. What size wheel spacers would you recommend?
![](/sites/all/themes/quadratec/logo.png)
With factory wheels Teraflex advises use of their 1.25" wheel spacers like shown in the following link. Teraflex 1.25" Wheel spacers. Thanks for your inquiry.
Brian B.
I have a 2016 Jeep Wrangler Rubicon Ultimate , will this leveling kit work with the Rubicon Ultimate model ? Is this kit compatible, I have the Mopar 2" or 2.5 " factory installed but it has a rake to it , it doesn't sit level.
![](/sites/all/themes/quadratec/logo.png)
It is not designed to be used with any other lift kits. Sorry for the inconvenience.
William T.
Will this kit work on a 2017 JK Unlimited Rubicon?
![](/sites/all/themes/quadratec/logo.png)
Yes it will. Thanks for your inquiry.
DOUG H.
Once installed how much offset do you need on the spacers? 1", 1.25", etc...?
![](/sites/all/themes/quadratec/logo.png)
Requires aftermarket wheels w/ 4.75” backspacing or less – or Offset Wheel Adapters (# 1055000) for stock wheels. Thanks for your inquiry.
William C.
Front sway bar links are included. Are rear sway bar links needed, and if so, how long and/or best fitment option?
Thank you.
![](/sites/all/themes/quadratec/logo.png)
Extended rear sway bar links are not needed. Thanks for your inquiry.
Gerald S.
Will you need wheel spacers with stock wheel and 285/75/17 tire
![](/sites/all/themes/quadratec/logo.png)
Wheel spacers or wheels with greater backspacing are recommended to avoid rubbing but not required.
Tom E.
Is a front end alignment required after install?
![](/sites/all/themes/quadratec/logo.png)
Alignments are required after any change to the factory suspension.
Mark H.
Will my factory shocks be okay with this kit or should they be replaced with longer ones?
![](/sites/all/themes/quadratec/logo.png)
This is compatible with factory shocks.