Reviews for EGR VSL Offroad Lighting for 18-24 Jeep Wrangler JL & Gladiator JT

Color match to my ‘21 Sarge green Rubi was exact. I had the Morimoto vent lights already installed to the turn signal so I just hooked these up to Aux 3&4 switches for now. Kind of expensive but the ‘cool-factor’ is legit.

Couple of notes: I made a custom harness for both light sets. I installed plugs at the ends of the light leads so they can swapped out later if needed. Ran separate grounds to each side.

Awesome upgrade. Looks as good as it works. Paint matched was very good.

The design and the lighting.

Looks like OEM and color match is great. Use this for going down sand roads to the beach to fish. LIghts up everything on the side of my Jeep.

GMyers

Dual purpose and extra side light. I have not received the lights yet so I cannot give a product review.

Great look and functional. The color match was perfect and the install was relatively easy as long as you get the right turn signal wire (white and green on both sides on my 2022 Rubicon). Very well made and emits quite a bit of light on the vehicle sides. Recommended.

Subtle add. Love the features. Looks like they belong from the factory. One note, my signal wire was white/green on the passenger side as well as the driver side. The instructions and other reviews I've seen note a different color wire on the passenger side. I have a 2020 Wrangler Diesel.

The lights look great. The ditch light function is very bright. The turn signal function is a bit dim. The look good at night but do look a bit silly during the day with a single LED flashing. The instructions consist of a single page wiring diagram that was wrong. I have a 2020 Gladiator and the correct wire for both sides was the white/green. The directions list white/green on drivers side and beige/brown on pass side for turn signal functionality. It is also annoying that there is a $200 discount based on the popularity of the color. My jeep is white so full price for me.
The lights do work as described but the installation documentation is shameful for a $500 or even $200 product and if you follow their direction, the left turn signal will not work and you will need to use a multimeter on the harness to confirm the correct wire after already splicing in to the wire identified by VSL.