Skip to main content
Home » Jeep Driveline » Transfer Case » Slip Yoke Eliminators (SYE) » Crown Automotive NP231 Slip Yoke Eliminator Kit with Drive Shaft

Reviews for Crown Automotive RT24004 NP231 Slip Yoke Eliminator Kit with Drive Shaft for 87-06 Jeep Wrangler YJ and TJ

< Back to the product
Zach S.
8/11/2024
5

This kit worked great, just make sure to read the notes. My YJ is a 1994 with the 1330 u-joint, I missed the fitment note when ordering to get a new axle yoke for the 1310 u-joint, I went down the o-Riley’s and picked up conversion u-joint spicer number 5-134x. I will order the yoke sometime but for now I am on the road and the vibration from my lift kit is gone.
Preston K.
6/27/2022
5

This is a great kit! It's very easy to install, plenty of resources on YouTube
Russell T.
6/10/2022
5

Price
Keith D.
1/5/2022
5

It's a complete kit
Craig T.
12/27/2021
5

Original
Keith M.
7/12/2021
4

I have a 97 TJ with an OME 2" lift. Driveshaft vibrations were severe especially with 32" tires and 4.56 gears due to the higher driveshaft speed on the highway.

Although this kit worked very well, was easy to install and cured 95% of my driveshaft vibrations issues it needs to be mentioned that you MUST PURCHASE rear lower adjustable links to get your pinion angle pointed at the T-Case. Without adjustable rear links (upper or lower, I found lower to work best) your pinion angle will not be ideal for a double cardan joint at the T-case and a standard joint at the pinion.