Skip to main content
Home » Jeep Soft Tops » Full Soft Tops » Replacement Soft Top Material » QuadraTop Adventure Top Fastback Conversion Soft Top
« Back to product
Does this come in clear windows? or can the tint be removed from these windows?
Sorry but no and no. Thanks for your question.
I'm confused. In a response to a previously asked question the answer included the following statement: "Please note the fold back sunrider feature will only be on those models equipped with the sunrider open feature on the factory equipped soft top." So does this mean that if one does not already have a "sunrider" feature the top then cannot be opened?
Correct. If you need a bow that is hinged like the factory sunrider, Mastertop has this bow assembly that will allow the fold back front. This is not offered in a smaller retrofit kit where you can reuse other pieces you have from your top. Mastertop Bow assembly with fold back front Thanks for your inquiry.
Does this top support the half upper doors, and will I need to purchase those separately?
This top works with half steel and factory soft upper doors, which are available separately. Aftermarket soft upper doors with glass sliding windows will also work. Thanks for your inquiry.
I have the original soft top bow assemble. Will this work with this top.
Yes, it will. Please note the fold back sunrider feature will only be on those models equipped with the sunrider open feature on the factory equipped soft top. Thanks for your inquiry.
Does this top still fold down like the factory top when you want to go fully open, or does it have to be removed?
No, the top is not a fully convertible top. The top remains in place when the rear windows are removed. If you want a fully convertible top, this model allows for folding the top on the back of the Jeep. https://www.quadratec.com/p/quadratop/gen-ii-complete-tinted-windows-black-diamond-jeep-wrangler-tj Thanks for your inquiry.
Does the top attach to the windshield with a factory style header (flip latches) or with bolt on hardware?
This top uses your OE framework assembly. It will need to be purchased if you do not have it. The original equipment frame uses flip latches at the windshield frame. It will not fit channels like the Bestop Supertop classic that bolts on. Thanks for your inquiry.
I have all the soft top hardware except a windshield header. What windshield header would you guys recommend I buy for this top/ which windshield headers would work?
https://www.quadratec.com/products/11122_0003_07.htm. This is the header only that can be used for this style of top and OE framework. Thanks for your inquiry.
I already have door surrounds and a tail gate bar. Does this have all the hardware to install on my Jeep and provides the flip back feature?
Your factory style framework that is supplied will determine whether you get the fold back front feature. You would have to have the feature on your factory frame. If you would like to add a frame to allow it, Mastertop or Bestop TJ framework kits will offer the fold back front. They would also have door surrounds and the tailgate bar. Thanks for your inquiry.