Skip to main content
Home » Jeep Lift Kits & Suspension » Lift Kits » Spacer Lifts » Teraflex 1.5” Performance Spacer Leveling Kit
« Back to product
Can you add this to the AEV 2inch spacer lift to eliminate the rake in the front?
Stacking of spacer lift systems is not advised. Sorry for any inconvenience.
Link to the Rear Bump Stop Strike Pad Extensions that it talks about in the description?
Click Here for the Teraflex 1959300 1/2" Bump Stop Strike Pad Shim Kit
Will the Teraflex 1155300 1.5”Preformance Spacer Leveling Kit level out my 2021 Gladiator Mojave ( will it make the front level with the back) in other words take the factory rake out of the front and make it level with the back end.?
The kit provides the option to level 1" or 1.5" of added front height to attain your preferred amount of rake. Use of both front spacers will level the Gladiator Mojave unless you have a lot of excess front end weight from a winch bumper. Thanks for your inquiry.
Can i add this kit to my 2” mopar suspension already installed?
No, you cannot. The 1.5" spacer leveling kit is designed for factory springs. Thanks for your inquiry.
Do I need to adjust the sway bar links? I have the JKS quicker disconnect installed.
Teraflex Optional sway bar disconnect set is applicable for 0" to up top 4" of lift and does not appear to have adjustment advice specific to the size lift being used. Thanks for your inquiry.
Will I be able to install 37” tires on my Gladiator Mojave
No. Teraflex states that 35" is the max tire size, even on models with Rubicon flares. Thanks for your inquiry.
Does this leveling kit work on a jeep gladiator Mojave?
Yes, it will fit Mojave trim levels. Thanks for your inquiry.
Do you have to have a front end alignment done after installing this lift
After altering the suspension it is always advisable to have an alignment done by a competent 4 wheel drive shop or by an alignment shop that is experienced with lifted 4 wheel drive vehicles. Thanks for your inquiry.
Can this leveling kit be used with the Mopar 2inch lift?
No, it cannot. Mopar advises to not stack suspension lift components. Thanks for your inquiry.