« Back to product
Rob H.
Does this include the nuts? If not, what is the part number to add them for purchase?
It does not included the nuts. Nut part number 06502697 is used for attaching the end that mounts to your sway bar. Here is a link to one from Crown Nut for Sway Bar Link. The link to axle bolt uses nut part number 06104718AA and we do not have sourcing for that one at this time. Thanks for your inquiry.
Dustin B.
Will these fit a 20 Gladiator Rubicon with ~ 2 in level kit?
Yes, these can be used on the Gladiator with a 2" levelling kit
Viqas A.
I have a mopar 2 inch lift kit Mopar P5155207. Will this fit ? do you have any other recommendation. It is making squeaking noise looks like the bushing is worn out. Can we order bushing only?
Yes this is a direct replacement for the end links that were supplied in that kit, unfortunately the bushings are not available separately.
Eddie Y.
What is the distance from the center of the stud to the center of the hole? Thanks
These are 7-1/2" from stud to eye
Danny B.
Will this fit the JT 2 inch Mopar Lift Kit? I need to replace mine. This shows only JL 2020.
Yes this is the same used in the Gladiator JT 2" suspension. We have updated the fitment on this part.
Brian M.
What size nut do I need for the bolt?
The attachment hardware is the same as original. You can find the replacement hardware here : https://www.quadratec.com/jeep-replacement-parts/wrangler-jl/front-stabilizer-bar-parts
Timothy D.
Is that center of stud to center of eye?
Yes
Timothy D.
In the description it says these are for the front in the specs it says there for the rear can you tell me which one therefore.
This has been corrected, it is for the front.
Josh D.
What are the lengths of these?
These are 7-1/2" from stud to eye