Skip to main content
Home » Jeep Lift Kits & Suspension » Lift Kits » Spring Lift Kits » Mopar 2" Performance Suspension
« Back to product
I’m putting a plow on my 2024 gladiator sport and the plow is heavy I was recommended that I get Bilstein 5100 shocks front and back Is this 2 “ lift a heavy duty one or should I go with heavy duty spring and the Bilstein 5100
I would recommend going with the Bilstein Reservoir Shock option "5160" The addition of the reservoir allows greater shock stroke length compared to a single body 5100. A reservoir shock (5160) will be superior here to a non-reservoir shock (5100)
Does this Mopar lift now come with Bilstein instead of Fox shocks?
Some Mopar lifts still have an option for Fox shocks, however Mopar has switched to Bilstein for newer kits.
Will this lift work on a Mojave Gladiator?
No, it will not. Sorry for the inconvenience.
Adding this to a Sport S JT what else is needed to run 37" ? Do I need to change the front fenders or what else?
This lift will allow you to run 35's but 37's will fit with high clearance fenders such as the Rubicon fenders , thanks for asking
I have the 2in mopar fox lift installed on my 2020 Jeep JT GLADIATOR. Just got a bumper and winch installed. Added approx 190lbs to front end and now I have a noticeable rake at 1in-1-1/2in. Does quadratic offer a leveling kit or recommendation to level?
3/4 coil spring spacers are okay to run in most cases for leveling. Make sure the shocks you run correspond to the amount of total lift on it. Thanks for your Inquiry.
I was told my new 2021 JT Rubicon was already lifted and could accept 37s. Is that accurate? Can I still install this as well and what benefit will I actually get?
Yes. Rubicon JT can accept 37" This kit would allow more clearance if you off-road a lot. Thanks for your inquiry.
Mopar lists this version (-AB revision) as discontinued on their site. Do you have directions for the new -AC revision, and when will you sell the -AC version?
Our current version will be the AC revision to the kit. Thanks for your inquiry.
Will I need to get anything else for this lift. I have a Sport S. (Track bar, longer break lines or anything that could affect the JT by lifting the suspension.)
Nothing else is required for this lift.
Will the Mopar lift adversely affect the highway handling of the JT?
No, the highway driving is not affected, original suspension geometry is retained through lengthened control arms and sway bar end links.
Will I need to do anything different to my fenders or axels if I have this lift installed on my overland and plan on upgrading to 35 inch tires on my stock overland wheels?
No, the 2" suspension is designed for fitment of 35" tires. If you end up with higher clearance fender flares then you will be able to run 37" tires.