Reviews for GP Factor LPB-1000-JK License Plate Relocation Kit for 07-18 Jeep Wrangler JK
Looks good
Unable to review, have not received product.
Nice relocation kit for the third brake light and license plate light. Its a bit on the costly side but well worth it.
I was agonizing over which license plate relocation kit to purchase. I have a 2017 JKUR and I have an aftermarket back up cam (more on that below). I felt like this was a lot of money. However, I was really pleased I got this.
Everything I needed came in one simple kit. I wound up reusing the factory harness from the original license plate light and having a nice heavy-duty cable long enough to make that run was great. I cut off the lamp side of the original harness and soldered it to the new light lead and plugged it in. Validate the wires first as they only work one way. I also cut off my snorkel with a metal blade in a jig saw just above the fins at the tire mount (remove mount first) . I did not worry about cutting it flush. You do not see it.
The best part is I was able to relocate my back-up camera bracket. This mount blocks the original after market location, so I modified the camera bracket by making the hole a slot and slipping it over the license plate light post and fastening it with the bolt and license plate light post to the GP Factor. You must mount the camera prior to the break light. Some people say the light does not fit in the hole, but if you unscrew the bolt over the wire insulation you can fit it in. Hold the wire so it does not twist. A bit of a pain and tight fit but works. The camera fits snugly under the relocated rear light and that holds it securely in place.
The license plate light and break light have disconnects so that is fine. The camera does not. So, to change the tire, you will need to remove the bracket, then break light and then unscrew the camera from the modified camera bracket. All that is need is a philips screwdriver to remove the break light and a small philips and ¼” wrench for the camera. I have spares of those tools, so I threw them in the Jeep.
Came out great. Took a bit of time to do it right, but very pleased.
This kit worked perfectly for relocating my license plate to the tire carrier. The LED license plate light keeps me legal and the install was easy.
Great product. Install was straightforward and easy
Clever design and works great. Definitely screw on the posts by hand and wrench tighten at the end. I put one on with a driver and cross threaded it and started to make a mess of things, but that's on me. Great product and I'd buy it again.
Good quality and easily install
Very simple yet extremely effective bracket design. What makes this product the best is the license plate light with harness. Very easy install overall even with routing the wires for the license plate light. I followed this video on YouTube for the routing...https://youtu.be/du1PGPnH3Gk.
I had to dremel the hole for the led slightly, but other than that the install was painless. Used positaps to wire into the harness on the passenger side taillight, Added the teraflex cover to plug the hole where the ugly grey 10 year old plastic piece used to reside.