« Back to product
Michael W.
Will this fit a 1999 Wrangler TJ with stock wheels and a 2-inch spring bushing lift?
For Right Hand Drive Jeep models, yes it will. Crown does not require a backspace or wheel offset modification. This kit does not fit domestic left hand drive models. Thanks for your inquiry.
John A.
Do you have a steering kit with stabilizer for a LHD 2000 TJ?
Yes. See the following link. Heavy Duty Steering LHD Thanks for your inquiry.
Josh L.
I have a standard American Wrangler TJ, not a rural mail carrier or imported model from the UK - will this fit? Or is there an equivalent product that I'm not finding on the Quadratec website that will fit?
The model for use with LHD is found in the following link. LHD Heavy Duty Steering Kit
Harbans G.
what is to torque for the crown nuts and the nut holding tie rod to drag link? Pl give torque specs also for the stabilizer
Tighten the nut at the steering knuckle to 47 N·m (35 ft. lbs.). Tighten the pitman nut to 81 N·m (60 ft. lbs.) and tie rod ball stud nut to 47 N·m (35 ft.lbs.). Install the steering dampener onto the drag link and tighten the nut to 74 N·m (55 ft. lbs.).
Camden B.
I have a 4.5 inch lift who’ll this fit my xj? If not show me something that will thanks!!!!
Yes this will work for Cherokee XJ's from 91-01, including those with lifts.
Gregory D.
Would this be suitable for a 99 Wrangler that has a 3 1/2 inch lift?
As long as it has Right Hand Drive steering yes, this will be perfect.