Skip to main content
Home » Jeep Body & Frame » Fenders » Inner Fenders » Smittybilt Front Aluminum Inner Fender Liners

Reviews for Smittybilt 76984 Front Aluminum Inner Fender Liners for 07-18 Jeep Wrangler JK

< Back to the product
Javier P.
9/21/2022
5

Front inner fenders fit perfectly. They do not come with much hardware. Just four blind rivets (2 per side). Unfortunately, I didn't locate the hardware/instructions/pamphlet bag which was under one of the packing box flaps. I ended up using self-drilling screws (after drilling a small hole) at each end of each liner. It worked just fine and they are firmly installed with no rattling. And looks good too.
Guest
5/16/2022
5

Gift
Phil L.
5/13/2022
5

One piece construction
Jack P.
10/5/2021
5

Looks
Joe N.
9/16/2021
5

Need to protect my engine cavity and the Smitty is vented.
Kenneth L.
11/30/2020
5

Great quality and install could not be easier. Total time to install front and back liners was about one hour. I used self tapping screws instead of the rivets that were provided.
Gary A.
9/30/2020
5

Amazing product and easy to install
KAT F.
5/9/2020
5

Picked up a rivet gun from harbor freight for under $10. The 4 rivets were the hardest part. There's a small gap on the top right driver's side. Fairly certain that's my own install job though since I couldn't get my fender flare off to place the liner higher up. I just wanted a little protection for my parts, eventually I'll go back and fix the install. Not in a hurry to drill out the rivets though. Product came super quick. Install was fairly straight forward. Did it on my own, I'm a 40 yr. old -not exactly highly talented woman lol. This area of my Jeep was already so dark that nobody notices whether the liners are there or not.
Joshua P.
4/22/2020
5

100% as advertised. They look great, easy to install and are exactly as advertised. Great product and wouldn’t expect anything less from Smittybilt.
John S.
12/28/2019
5

This is my second set to install. I love these fender liners, the install super easy and look awesome. They are precut for rock lights and give plenty of options for different types of lights. If you are installing these at the same time as fenders, do the fenders first, they cover up the mounting areas for the front 3 bolts. I touched up all the remaining exposed areas of paint with some spray in duracoat...these look awesome when paired with the XRC fenders....