Skip to main content
Home » Jeep Wheels » Alloy Wheels » Quadratec '41 Wheel
« Back to product
What type of cleaner would you use on these wheels?
Check out: https://www.quadratec.com/p/303/wheel-cleaner-30591
I have a 2021 Wrangler Unlimited 4-door. I need new tires, and I'm contemplating upgrading the wheels at the same time. It's the wife's vehicle and she doesn't want super big tires but can live with a more aggressive tread. Suggestions for tires or tire size?
A stock 245 75 17 tire should not be used on the 8.5" width but if equipped with 255 75 R17, that would be okay. 265 70 R17 and 285 65 R17 sizes of similar to stock outer diameter would also be acceptable on that rim width. 33" x12.50 would be a good fit with the wheel and would not require modifications. Thanks for your inquiry.
Will Quadratec wheels with 315/70R17 tires work on 2021 Rubicon Unlimited ?
Yes, it will. Thanks for your inquiry.
How much more will these wheels stick out than the stock wheels on a ‘22 JT Willys Sport?
Inner edge from backspace is 1.38" of bump out, and the wheel is one inch wider than your stock wheel, so the outer edge will be closer to approximately 2.38" farther out with the same size tire. Thanks for your inquiry.
Using Quadratec '41 Wheels. Will a 315/70 R17 Tire fit on a stock 2013 Rubicon spare tire rack without modification.
A Heavy duty tire carrier or hinge reinforcement would be suggested for that tire size. Extended and trimmable tailgate bump stops may also be needed to adjust for the backspace variation from a factory wheel and tire setup. See the following link.Quadratec Tailgate Bump Stop Kit . Thanks for your inquiry.
I'm new to the game. I have a 2019 Wrangler JL and I like these rims. I was wondering if I would need to have a lift installed and what size tires would work best? Thanks in advance.
These could accept a factory size tire. They are appropriately spaced for running larger tires so they will give a wider stance. They are great for running 34-35" tires and larger but the use of a suspension lift would be suggested for greater than 33". Thanks for your inquiry.
Will these fit 2009 Jeep grand Cherokee?
While they will fit from a bolt pattern standpoint, they would sit 2.57" farther out with the same size tire as factory so added fender flare coverage for tread maybe needed. Thanks for your inquiry.
Can I put a 245/75 r17 tire on this rim?
Most brands of 245 75 R17 advise to be on 8" wide for maximum width so this tire would not be best for the 8.5" width of the 41 series. Sorry for the inconvenience. Thanks for your inquiry.
Can you put a 35” with a two inch lift? 2009 Jeep Rubicon.
It would be passable if you don't really take the Jeep off-road, but if you will be hitting the trails and testing the wheel travel, 3.5" of lift would be better equipped for articulating and not encountering rub. Thanks for your inquiry.
I’m running Nitto’s 35/12.5 r18 light truck on 18” black rhino Abrams. My current set up is about 3” out from the fender. I like some stick out but unfortunately hard park downtown and driving etc…now that my work requires me. Hoping this set of wheels/ Nitto tires will be an inch or so out from the fenders? If not is there a backspacing that I should be looking for?
With the same size of tire, which would have to for the 17" wheel OD the '41 wheel has, that combo would come in 1.1" closer to the center of the Jeep. Unfortunately, the potential for turning radius rub is more likely to occur if you run too large of a tire and a higher backspace wheel. Thanks for your inquiry.